2008 Arctic Cat 366 ATV Service Manual, Page 46Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 46

ATV-1068A 2Wash the cylinder in parts-cleaning solvent3Inspect the cylinder for pitting, scoring, scuffing, and corrosionIf
the bore is severely damaged or gouged, replace the cylinder Measuring Camshaft Runout NOTE: If the camshaft is out of tolerance,
it must be replaced 1Place the camshaft on set of blocks; then position the dial indicator contact point against the shaft
and zero the indicator 2Rotate the camshaft and note runout; maximum tolerance must not exceed specificationsMeasuring Camshaft
Lobe Height 4If any measurement exceeds the limit, bore the cylinder and install an oversized piston or replace the cylinderNOTE: