2008 Arctic Cat 366 ATV Service Manual, Page 51Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 51

APiston still at top-dead-centerBCamshaft lobes directed down (toward the piston)CCamshaft alignment marks parallel to the
tab washer is installed correctly to cover the alignment hole on the sprocketIf the alignment pin falls out, severe engine
damage will result 19Rotate the crankshaft until the first cap screw (from step 17) securing the sprocket to the camshaft
can be addressed; then tighten to 11 ft-lbBend the tab to secure the cap screw20Install the cylinder head plug with the cupped
end facing the camshaft and the opening directed downwards21Remove the cap screw from the end of the chain tensionerAccount
for the plunger, spring, and gasket 17Apply red Loctite #271 to the first cap screw securing the sprocket and tab washer
to the camshaft; then install the cap screw and tab washerTighten cap screw only until snug 22Depress the spring-loaded lock