2008 Arctic Cat 366 ATV Service Manual, Page 53Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 53

Removing Left-Side Components ACoverStator Assembly 1Remove the cap screws securing the outer magneto cover and remove the
Inspect the inside of the left-side cover for any shaft washers that may have come off with the coverMake sure they are returned
to their respective shafts and that the starter idler gear spacer is on the shaft or in the cover BRotorFlywheel CStarter
Motor NOTE: Steps 1-3 in the preceding sub-section must precede this procedure 4Remove the rotorflywheel nutMD1186 3Using