2008 Arctic Cat 366 ATV Service Manual, Page 54Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 54

6Using Magneto Rotor Remover, break the rotorflywheel assembly loose from the crankshaftRemove the remover, the crankshaft
tensionMD1368 9Remove the shift detent camNote position of spacer for installing purposes10Remove the cam stopper assembly11Remove
two starter motor cap screwsMD1369 KC217 MD1370 7Remove the starter idler gear (No1) and starter idler gear (No2) 12Remove
starter motor by tapping lightly with malletNOTE: The starter motor is non-serviceable component and must be replaced as
an assembly 13Using an impact screwdriver, remove the three Phillips-head screws holding the crankshaft bearing retainerRemove