2008 Arctic Cat 366 ATV Service Manual, Page 61Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 61

4Place the pin into position on the oil pump shaft, install the oil pump driven gear making sure the recessed side of the
CAUTION Care must be taken when installing the flange nut; it has "left-hand" threads 8Install the one-way clutch making
sure that the green dot or the word OUTSIDE is directed away from the crankcase 5Install the cam chainNOTE: Keep tension
on the cam chain to avoid damaging the crankcase boss 6Place the pin into position, install the oil pump drive gear, and
tighten the cap screw (coated with red Loctite #271) to 63 ft-lb 9Install gear shift position switch spacer and switch making