2008 Arctic Cat 366 ATV Service Manual, Page 67Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 67

ATV-0104 Correcting Tooth Contact NOTE: If tooth contact pattern is comparable to the correct pattern illustration, no correction
connecting rod and crankshaft journal If tooth contact pattern is comparable to an incorrect pattern, correct tooth contact
according to the following chartTooth Contact Contacts at Top Contacts at Root Shim Correction Decrease Shim Thickness Increase
Shim Thickness NOTE: To correct tooth contact, steps and (with NOTE) of "Correcting Backlash" must be followed and the above
"Tooth ContactShim Correction" chart must be consulted ! CAUTION After correcting tooth contact, backlash must again be checked
and corrected (if necessary)Continue the correcting backlashcorrecting tooth contact procedures until they are both within
tolerance values CRANKSHAFT ASSEMBLY Measuring Connecting Rod (Small End Inside Diameter) 1Insert snap gauge into the upper