2008 Arctic Cat 366 ATV Service Manual, Page 72Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 72

3Align the front and rear output flanges with the drive couplers; then secure with the screws and tighten to 20 ft-lb 5Connect
cable and secure with cap screws and nutsTighten to ft-lb KC242 KC228A 4Install the front and rear V-belt cooling boots and

Back to 2008 Arctic Cat 366 ATV Service Manual
ATV Jet Ski Outboard Motors Personal Watercraft Snowmobiles Stern Drives