2008 Arctic Cat 366 ATV Service Manual, Page 79Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 79

NOTE: If the slow jet is obstructed, the mixture will be extremely lean at idle and part-throttle operation 11Inspect the
cleaner2Soak for 30 minutes; then rinse with clean, hot water3Wash all non-metallic components with soap and waterRinse thoroughly4Dry
all components with compressed air only making sure all holes, orifices, and channels are unobstructed5Inspect the carburetor
body for cracks, nicks, stripped threads, and any imperfections in the casting6Inspect the vacuum pistondiaphragm for cracks,
imperfections in the casting, or cracks and tears in the rubber7Inspect float for damage8Inspect gasket and O-rings for distortion,
tears, or noticeable damage9Inspect tips of the jet needle, pilot screw, and the needle jet for wear, damage, or distortion10Inspect
the slow jet and main jet for obstructions or damage KC0028A NOTE: Turn the pilot screw clockwise until it is lightly seated;