2008 Arctic Cat 366 ATV Service Manual, Page 85Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 85

Oil Cooler NOTE: Some oil seepage may occur when installing the oil pressure gaugeWipe up oil residue with cloth 3Warm up
procedure 1Remove the input and output hoses from the fittings on the cooler ! CAUTION Elevate and secure the hoses to avoid
oil spillage 2Remove the cap screws securing the oil cooler to the frameAccount for grommetsKC268 NOTE: If the oil pressure
is lower than specified, check for low oil level, defective oil pump, or restricted oil coolerNOTE: If the oil pressure is
higher than specified, check for clogged oil passage, clogged oil filter, or improper installation of the oil filter 3Remove