2008 Arctic Cat 366 ATV Service Manual, Page 110Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 110

3Install the pinion gear assembly into the housingUsing the 48 mm Internal Hex Socket, secure the pinion gear assembly with
small amount of oil to the gasket; then install the gasket 7Place the input shaft housing assembly onto the gear housing;
then secure with the existing cap screwsTighten to 23 ft-lbCC890 4Place punch on the edge of the lock collar in the oil gallery
area; then using hammer, stake the lock collar to ensure that the collar will remain securely tightened NOTE: If new gear