2008 Arctic Cat 366 ATV Service Manual, Page 113Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 113

2Using press, remove the bearing 5Repeat steps 1-4 for the opposite sideINSTALLING DIFFERENTIAL 1Align the input flange
and tighten to 20 ft-lb NOTE: Prior to installing the seal, apply High Performance #2 Molybdenum Disulphide Grease to the
seal outside diameter 4Using an appropriate seal installation tool, evenly press the seal into the cover bore until seated
! CAUTION Make sure the tool is free of nicks or sharp edges or the seal will be damaged 3Install the front axles (see Drive