2008 Arctic Cat 366 ATV Service Manual, Page 114Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 114

Drive Axles REMOVING REAR DRIVE AXLES 1Secure the ATV on support stand to elevate the wheels ! WARNING Make sure the ATV
and secure with the patch-lock cap screws tightened to 20 ft-lb ! CAUTION The caliper should be supportedIf the calipers
are allowed to hang from the hose, damage may occur 6Slide the hub off the shaft and set aside7Remove the cap screw and lock
nut securing the knuckle to the upper A-armDiscard the lock nut 5Install the wheels and tighten to 40 ft-lb6Pour 275 ml (9.3
fl oz) of SAE 80W-90 hypoid gear lubricant into the differential and install the filler plugTighten to 16 ft-lb7Remove the