2008 Arctic Cat 366 ATV Service Manual, Page 131Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 131

7Inspect the handlebar tube for cracks, wear, or unusual bends8Inspect the handlebar grips for damage or wearINSTALLING 1Install
in this section) 2Apply grease to the inner and outer housings of the upper steering post support; then with the housing
cap in place, secure with the cap screwsTighten to 20 ft-lb Handlebar Grip REMOVING 1Loosen but do not remove the cap screws
in the end of the handlebar; then tap lightly on the head to dislodge the handlebar plug 3Using red Loctite #271 on the threads,