2008 Arctic Cat 366 ATV Service Manual, Page 136Get this manual

2008 Arctic Cat 366 ATV Service Manual, Page 136

7Remove the front body panelfender panelCLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged
soap and water2Inspect fenders for cracks andor loose rivets3Inspect for any missing decalsINSTALLING 1Making sure the shift
spring is in place and the shift lever is properly positioned, place the front body panelfender panel onto the ATVWith the
front rack in place, loosely install the front rack hardware2Connect the electrical connectors under the electric panel;
then connect the light connectors and attach onto the frame Exhaust System REMOVING MUFFLER 1Remove the two exhaust springs
at the mufflerexhaust pipe juncture 2Slide the muffler rearward to clear the mounting lugs and remove the mufflerAccount