2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 8Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 8

FILLING GAS TANK 1Clean the seat cushion (cover and base) with damp cloth and allow it to dry2Clean the ATV thoroughly by
chamber5Plug the exhaust hole in the exhaust system with clean cloth6Apply light oil to the upper steering post bushing and
plungers of the shock absorbers7Tighten all nuts, bolts, cap screws, and screwsMake sure rivets holding components together
are tightReplace all loose rivetsCare must be taken that all calibrated nuts, cap screws, and bolts are tightened to specifications8On
liquid cooled models, fill the cooling system to the bottom of the stand pipe in the radiator neck with properly mixed coolant9Disconnect
the battery cables; then remove the battery, clean the battery posts and cables, and store in clean, dry area10Store the
ATV indoors in level position Since gasoline expands as its temperature rises, the gas tank must be filled to its rated capacity
onlyExpansion room must be maintained in the tank particularly if the tank is filled with cold gasoline and then moved to