2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 16Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 16

CHECKING AND CLEANING DRAINS 1Inspect the drains beneath the main housing for debris and for proper sealing ! CAUTION The
sure the proper cap screws are with the proper coverTighten the cap screws securely ValveTappet Clearance (Feeler Gauge Procedure)
NOTE: For the 700 EFI, see ValveTappet Clearance (700 EFI) in this section ValveTappet Clearance (Valve Adjuster Procedure)
NOTE: For the 700 EFI, see ValveTappet Clearance (700 EFI) in this section To check and adjust valvetappet clearance, use
the following procedure1Remove the timing inspection plug; then remove the tappet covers (for more detailed information,
see SectionServicing Top-Side Components)2Rotate the crankshaft to the TDC position on the compression strokeNOTE: At this
point, the rocker arms and adjuster screws must not have pressure on them To check and adjust valvetappet clearance, use
the following procedureNOTE: On the 500H1 models, the seat, storage compartment cover assembly, compartment box, air filterfilter