2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 24Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 24

(400500 Manual Transmission) To adjust the clutch, use the following procedure1Using an impact driver, remove the screws
1)Do not under any circumstances substitute tires of different type or size 2Loosen the jam nuts securing adjustment screw
#1 (forward) and adjustment screw #2 (rearward) ! WARNING Always use the size and type of tires specifiedAlways maintain
proper tire inflation pressure TIRE INFLATION PRESSURE Front and rear tire inflation pressure should be 0.35 kg-cm (5.0 psi)
Steering Components 3Rotate adjustment screw #1 counterclockwise until it stops The following steering components should
be inspected periodically to ensure safe and proper operationAHandlebar grips not worn, broken, or looseBHandlebar not bent,
cracked, and has equal and complete full-left and full-right capabilityCSteering post bearing assemblybearing housing not