2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 26Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 26

2Measure the distance from the floor to the mid-point of each headlight3Using the measurements obtained in step 2, make horizontal
knob clockwise to raise the beam or counterclockwise to lower the beam 3Insert the bulb socket assembly into the housing
and turn it clockwise to secureCHECKINGADJUSTING HEADLIGHT AIM The headlights can be adjusted vertically and horizontallyThe
geometric center of the HIGH beam light zone is to be used for vertical and horizontal aiming1Position the ATV on level floor
so the headlights are approximately 6.1 (20 ft) from an aiming surface (wall or similar aiming surface)CD714A Shift Lever