2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 27Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 27

3Tighten the jam nuts securely; then shift the transmission to each position and verify correct adjustment4Install the left-side
may be loose or corroded, or the lever may need adjustingTo adjust, proceed to Adjusting Shift LeverADJUSTING SHIFT LEVER
1Remove the seat; then remove the left-side engine coverNOTE: Steps 2-4 are for all models except the 700 EFIFor the 700
EFI, proceed to step 5 2With the ignition switch in the ON position, loosen jam nut (A) (left-hand threads); then loosen
jam nut (C) and with the shift lever in the reverse position, adjust the coupler (B) until the transmission is in reverse
and the (R) icon appears on the LCD 6Turn the ignition switch to the ON position; then move the shift arm (3) until the Neutral
icon (N) appears on the LCD7Rotate the shift rod (4) until the shifter is directly aligned with the Neutral position on the