2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 64Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 64

BCamshaft lobes directed down (toward the piston)CCamshaft alignment marks parallel to the valve cover mating surfaceDRecessed
#271)Tighten to 11 ft-lb; then bend the tab to secure the cap screw ! CAUTION Care must be taken that the tab washer is installed
correctly to cover the alignment hole on the sprocketIf the alignment pin falls out, severe engine damage will result 19Rotate
the crankshaft until the first cap screw securing the sprocket to the camshaft (from step 17) can be addressed; then install
the cap screwTighten to 11 ft-lb; then bend the tab to secure the cap screw20Install the cylinder head plug in the cylinder
head with the open end facing the cylinder head21Remove the cap screw from the end of the chain tensioner; then account for