2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 66Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 66

31If removed, install the spark plug and tighten to 12 ft-lb 2Remove the flange nut securing the starter cup to the crankshaft;
components may be necessaryNote the AT THIS POINT information in each sub-sectionCC943 NOTE: The enginetransmission does
not have to be removed from the frame for this procedure 3Remove the gear shift stopper (located above the hilow shift shaft)Account
for the washer, spring, and stopper Removing Left-Side Components ACoverStator Assembly 1Remove the four cap screws securing