2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 72Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 72

6Install the ratchet onto its pin making sure the end is properly installed on the reel7Install the shaft, spring, and the
the rope to retract11Pull the rope out two or three times to check for correct tensionNOTE: Increasing the rotations in step
10 will increase spring tension 2Shift fork groove width must be within specificationsMEASURING SHIFT FORK TO GROOVE (Side
Clearance) 1In turn, insert each shift fork into its groove2Using feeler gauge, measure the clearance between the shift fork
and the groove MEASURING SHIFT FORK (Thickness) NOTE: Whenever shift fork is out of tolerance, replacement is necessary 1Using