2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 75Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 75

15Install the mm cap screws and mm cap screw to secure the left-side coverOnly finger-tighten at this time CC991 16Place
securely ! CAUTION Make sure the speedometer gear and output shaft gear match up during assembly CCover DSpeedometer Drive
EHiLow Shifter Assembly FRecoil Starter NOTE: Steps 1-13 in the preceding sub-section must precede this procedure 14Place
the gasket and left-side cover into position on the crankcaseNOTE: It may be necessary to push or pull the splined HiLow
range shift shaft to establish covercrankcase mating 18Place the starter cup into position on the crankshaft making sure