2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 76Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 76

Right-Side Components NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to
have to be removed from the frame for this procedure Removing Right-Side Components AOil Filter 20Place the recoil starter
assembly into position on the left-side cover; then tighten four cap screws (coated with blue Loctite #243) to ft-lb 1Using
an adjustable Oil Filter Wrench, remove the oil filter 2If the engine has not been removed, lay the ATV on its left side;
then remove the cap screws securing the right-side cover to the crankcaseRemove the coverAccount for the gasket and for two