2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 80Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 80

17Remove the two Phillips-head cap screws securing the strainer InspectingMeasuring Clutch Driven Plate Warpage 1Inspect
Plate (Fiber) Thickness 1Using calipers, in turn measure the thickness of each drive plate in several locations PRIMARY CLUTCH
ASSEMBLY (InspectingMeasuringAssembling) NOTE: Prior to inspecting and measuring components, it is recommended that all components
be removed from the primary gear assembly and be cleanedNOTE: When removing components from the primary gear assembly, account
for the bushing that fits into the primary gearCC243D 2Drive plate thickness must not exceed minimum specifications3If the
fiber plate tabs are damaged, the plate must be replaced4Inspect the clutch sleeve hub for grooves or notchesIf grooves or