2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 83Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 83

Installing Right-Side Components AOil StrainerOil Pump BGear Shift Shaft 1Place the oil strainer with new O-ring into position
installing the driven gearCC163D 2Place the strainer cap into position on the strainer making sure the O-ring is properly
installed and secure with the cap screws; then install and tighten the oil drain plug to 16 ft-lbCC976 5Place the gear shift
cam plate and guide onto the gear shift cam making sure the alignment pin was installedSecure assembly with the cap screw