2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 84Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 84

7Install the gear shift shaft 9Place the chain into the crankcase; then secure it from the top side with wire for ease of
used, the hub and plate will have clearance between them and they will not operate properly 8Install the spacer, pin, and
oil pump drive gear onto the crank balancer shaft making sure the shoulder of the drive gear is facing inward toward the
crankcase; then secure with the washer and nut (threads coated with red Loctite #271) tightened to 58 ft-lb 11Simultaneously,
place the primary clutch assembly and the centrifugal clutch housing on their respective shafts making sure the sleeve is