2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 85Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 85

NOTE: After placing the primary clutch assembly onto the shaft, pull out on the pressure plate tower to ensure the pressure
the four roller assembly cap screws in crisscross pattern making sure there is no clearance between the clutch plates when
secured 13Place the primary drive one-way clutch into the centrifugal clutch housing noting the word OUTSIDE for proper placement
16Install the clutch release arm and release roller guide making sure the release roller and guide are aligned 14Install
the centrifugal clutch shoe and washer; then secure with the centrifugal clutch-shoe nut (left-hand threads)Tighten to 94