2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 87Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 87

2Remove the left-side mm cap screws (two from inside the case) securing the crankcase halvesNote the location of the different-lengthed
and IN ORDER 4Using an appropriate crankcase separator and tapping lightly with rubber mallet, separate the crankcase halvesAccount
for two alignment pins, C-ring, and two washersNOTE: To keep the shaftgear assemblies intact for identification, tap the
shafts toward the left-side crankcase half when separating the halves KEY ABCDEF Crank Balancer Assembly Crankshaft Balancer