2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 90Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 90

! CAUTION After correcting tooth contact, backlash must again be checked and corrected (if necessary)Continue the correcting
end of the connecting rod away from the dial indicator3Maximum deflection must not exceed specificationsMeasuring Connecting
Rod (Big End Side-to-Side) 1Push the lower end of the connecting rod to one side of the crankshaft journal2Using feeler gauge,
measure the gap between the connecting rod and crankshaft journal ATV-0104 Correcting Tooth Contact NOTE: If tooth contact
pattern is comparable to the correct pattern illustration, no correction is necessary If tooth contact pattern is comparable
to an incorrect pattern, correct tooth contact according to the following chartTooth Contact Contacts at Top Contacts at