2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 103Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 103

Installing EngineTransmission NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the
the lower front engine mounting through-bolt, spacer, and washerSecure with the flange nutsTighten to 40 ft-lb 3Raise the
rear of the engine and place block under it; then install the propeller shaft and output flange into the rear drive coupler
6Connect the crankcase breather vent hose and secure with the clamp 7Connect the oil cooler hoses to the engine and secure