2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 108Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 108

9Remove the clamps securing the cooling ducts to the V-belt housing10Remove the cooling ducts from the V-belt cover 14Remove
the two cap screws securing the exhaust pipe to the engine; then remove the exhaust springs from the muffler at the juncture
in front of the muffler 12Loosen the clamp securing the carburetor to the intake; then route the carburetor assembly up and
away from the engine13Remove the E-clip securing the shift rod to the engine shift arm; then allow the shift rod to hang
by the pivot axle bolt 16Remove the four cap screws securing the rear output shaft to the transmission; then push the shaft