2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 109Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 109

23Remove the cap screw securing the engine ground wire to the engine24Remove the two engine mounting through-boltsAccount
lead from the wiring harness 25Slightly raise the front of the engine to disengage the front driveshaft from the front output
yokeCF172A 19Disconnect the stator-to-rectifierregulator connector20Remove the temperature sensor wires from the engineNOTE:
There are two temperature sensors 26Remove the engine from the left side by moving the engine forward while raising the engine