2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 126Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 126

Removing Left-Side Components ARecoil Starter BStarter Cup CCoverStator Assembly 1Remove the four recoil starter cover cap
starter cupAccount for the O-ring inside the cup NOTE: Inspect the inside of the left-side cover for any shaft washers that
may have come off with the coverMake sure they are returned to their respective shafts and that the starter idler gear spacer
is on the shaft or in the cover 3Remove the left-side cover-to-crankcase mounting cap screws noting the location of the mm
cap screw with the washer near the middle of the left-side coverKeep the different-lengthed mm cap screws in order for installing
purposes DRotorFlywheel EStarter Motor NOTE: Steps 1-4 in the preceding sub-section must precede this procedure 5Remove the