2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 128Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 128

10Remove the shift detent camNote position of spacer for installing purposes11Remove the cam stopper assembly12Remove the
cause injuryMD1224 13Remove two starter motor cap screws 1Rotate the reel counterclockwise until the notch of the reel is
near the rope guide in the caseGuide the rope into the notch and slowly allow the reel to retract until all spiral spring
tension is released 14Remove starter motor by tapping lightly with mallet AT THIS POINT To service the starter motor, see
Section 5 ! CAUTION During the disassembly procedure, make sure all spring tension is released before continuing 15Using