2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 131Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 131

4Install the shift detent cam making sure the spacer is properly positioned 8Place the key into its notch; then slide the
gasket into positionInstall the left-side coverNoting the different-lengthed mm cap screws, the position of the shifter bracket,
and the location of the long cap screw with the washer, tighten cap screws only until snugMD1086 5Install the cam stopper
assembly6Install the gear shift shaft assembly and washer making sure to align the alignment marks 10Install the starter