2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 139Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 139

3Inspect two grease seals in the movable face for nicks, cuts, or damage 3Install the three pins and spacers into the fixed
to the fixed face will occur when the spring is compressed 4Install the movable face sleeve aligning the hole in the spring
seat with the spring anchor hole in the movable face 5Install the spring over the hub and movable face sleeve; then insert
the end of the spring through the sleeve and into the spring anchor hole in the movable face 2Apply multi-purpose grease
to the O-rings and grease seals on the movable face; then install on the fixed face making sure the alignment marks are properly