2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 140Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 140

6Place the spring holder on the spring engaging the spring end with the appropriate anchor hole 9Continue compressing the
thread the wing nut onto the bolt 11Remove the wing nut, washer, and holding handle; then remove the driven pulley from the
pulley compressor Installing Right-Side Components AOil StrainerOil Pump 8Compress the spring until the spring holder nears
the threads on the fixed face hub; then using the handle, wind the spring holder counterclockwise to align the flats of the