2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 141Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 141

2Noting the directional arrow from removing, place the strainer cover into position on the crankcase making sure the O-ring
oil pump into position on the crankcase and secure with the Phillips-head screws coated with blue Loctite #243Tighten to
ft-lb 6Place the pin into position, install the oil pump drive gear, and tighten the cap screw (coated with red Loctite #271)
securely MD1017 MD1060 4Place the pin into position on the oil pump shaft, install the oil pump driven gear making sure the