2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 146Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 146

6Noting the position of the two holes on the end, remove the shift cam assemblyAccount for inner and outer washers ! CAUTION
7Remove the counterbalance gearAccount for the key8Remove the counterbalance shaft Servicing Center Crankcase Components
NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance, replacement is necessary SECONDARY
GEARS NOTE: When checking and correcting secondary gear backlash and tooth contact, the universal joint must be secured to
the front shaft or false measurements will occurMD1024 Checking Backlash NOTE: The rear shaft and bevel gear must be removed
for this procedureAlso, always start with the original shims on the rear shaft 9Using Crankcase SeparatorCrankshaft Remover,