2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 153Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 153

Installing EngineTransmission NOTE: Arctic Cat recommends that new gaskets and O-rings be installed whenever servicing the
the engine forward as far as possible 5Install two engine mounting through-bolts, two bushings, and two washers; then tighten
the through-bolt flange nuts to 40 ft-lb CD809 CD818 3Raise the rear of the engine and place block beneath it; then install
the propeller shaft and output flange into the rear drive coupler 6Secure the exhaust pipe to the engine with two cap screws;