2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 158Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 158

13Secure the carburetorthrottle body assembly up and away from the engine14Remove the E-clip securing the shift rod to the
mufflerAccount for the two exhaust springs 20Disconnect the speed sensor connector from the sensor housingCF138A 16Remove
the two cap screws securing the exhaust pipe to the cylinder head; then remove the pipe 21On the right-side, disconnect the
gear shift position switch (A), stator connector (B), and the CDI connector (C) 17Remove the two coolant hoses from the engine;