2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 160Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 160

Top-Side Components NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to
output drive yoke NOTE: The enginetransmission does not have to removed from the frame for this procedure Removing Top-Side
Components AValve CoverRocker Arms BCylinder HeadCamshaft 29Move the engine to the rear enough to allow the front driveshaft
to clear the front output yoke; then move the engine forward and to the leftThe engine will come out the left side of the
frame NOTE: Remove the spark plug and timing inspection plug; then using the recoil starter, rotate the crankshaft to top-dead-center