2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 172Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 172

Installing Top-Side Components APiston BCylinder NOTE: If the piston rings were removed, install them in this sequenceCC287D
the direction of the exhaust side of the piston (5) for correct ring end gap orientationCF061A BInstall the compression rings
(1 and 2) so the letter on the top surface of each ring faces the dome of the pistonRotate the rings until the ring end gaps
are on directly opposite sides of the piston (see illustration)NOTE: On the 500, the chrome (silver) ring should be installed
in the top positionOn the H1 models, the ring with the orientation mark (MTOP or TOP) should be installed in the second (middle)