2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 173Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 173

ATV-1024A 3Lubricate the inside wall of the cylinder; then using ring compressor or the fingers, compress the rings and slide
rings will result in engine damage 1Install the piston on the connecting rod making sure there is circlip on each side and
the open end of the circlip faces upwardsNOTE: The piston should be installed so the arrow points toward the exhaustCC024D
4Loosely install the two nuts which secure the cylinder to the crankcaseNOTE: The two cylinder-to-crankcase nuts will be
tightened in step 10 2Place the two alignment pins into positionPlace the cylinder gasket into position; then place piston