2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 176Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 176

19Rotate the crankshaft until the first cap screw (from step 17) can be addressed; then tighten to 10 ft-lbBend the tab
adjuster shaft tension will be released in step 24 23Place the chain tensioner adjuster assembly and gasket into position
on the cylinder and secure with the two cap screws 21Install the cylinder head plug in the cylinder head with the open end
facing downward and toward the inside ! CAUTION The open end of the plug must be positioned downwardCD469 24Using flat-blade
screwdriver, rotate the adjuster screw inside the tensioner counterclockwise until all tension is released; then install