2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 180Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 180

NOTE: There is an oil passage beneath the driven geardrive gear assemblyThis passage should be plugged prior to removing
continuous downward pressure must be exerted on the reel so it does not accidentally disengage and cause injuryFI302 1Rotate
the reel counterclockwise until the notch of the reel is near the rope guide in the caseGuide the rope into the notch and
slowly allow the reel to retract until all spiral spring tension is released 15Remove the gear shift cam plate; then remove
the cam stopper and cam stopper springAccount for two washers ! CAUTION During the disassembly procedure, make sure all spring