2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 181Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 181

5Carefully lift the reel from the case making sure the spiral spring does not accidentally disengage from the case B601D
follow steps 7-8B602D 4Remove the spring, collar, and friction spring; then remove the ratchet and account for the pin 7Remove
the spring from the case by lifting the spring end up and outHold the remainder of the spring with thumbs and alternately
release each thumb to allow the spring to gradually release from the case8Unwind the rope from the reel and remove the ropeCleaning
and Inspecting NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Clean all
components2Inspect the springs and ratchet for wear or damageB603D 3Inspect the reel and case for cracks or damage4Inspect