2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 193Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 193

5Install the spring over the hub and movable face sleeve; then insert the end of the spring through the sleeve and into
while guiding the spring holder onto the hubWhen slight resistance is felt, stop turning the wing nut10Install the nut (threads
coated with red Loctite #271); then tighten the nut to 74 ft-lb using the spanner and torque wrench 7Assemble the notched-ring
nut, spring holding handle, one flat washer, and the wing nut in order on the pulley compressor bolt; then thread the wing