2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 198Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 198

2Remove the reverse idler gear assembly (F)Account for all washers, shaft, bushing, and the gear CC675 3Remove the shift
gear off the crank balancerAccount for the key in the keyway 8Remove the crank balancerNOTE: There is flat spot on the crank
balancer bearing flange to allow clearance past the crankshaft 5Remove the countershaft assembly (D)Account for washer on
each end of the countershaft 9Remove the snap ring securing the water pump driven gear shaft10Using hydraulic press, remove
the crankshaft assemblyNOTE: Use protective end cap to prevent damage to the crankshaft threads NOTE: Do not disassemble